Description

DESCRIPTION: BOYSEN^® Automotive Lacquer is a nitrocellulose, solvent-based, high-gloss lacquer type paint that is easy to apply and dries rapidly to a durable, attractive finish.

PRINCIPAL USES: It is ideal for interior wooden surfaces such as doors, jambs, cabinets, and shelves and metal substrates.

SERVICE CONDITION: If necessary, add approximately 10% by volume of BOYSEN^® Lacquer Flo B-1205 to the ready-to-use mixture.

FINISH: Gloss

DRY TIME:
Touch: 10 minutes
Recoat: 1 hour

THEORETICAL COVERAGE PER 4-LITERS: 25 – 30 sq.m.
*Depending on surface texture and porosity

TINTING: Will accept BOYSEN^® Automotive Lacquer Tinting Colors at a maximum level of ¼ Liter per 4-Liter can. Darker shades should be factory-mixed.

THINNING SOLVENT: BOYSEN^® Lacquer Thinner B-50

CLEAN-UP SOLVENT: BOYSEN^® Lacquer Thinner B-50

PACKAGING: 1-Liter and 4-Liters

APPLICATION: By spray

SURFACE PREPARATION:
Wooden Surfaces
Sand surface until wood is smooth to the touch. Hammer all nails deep enough to apply BOYSEN^® Lacquer Spot Putty B- 306. Dust off surfaces completely then wipe with a clean rag. If repainting, remove all paint by using manual or mechanical methods prior to the application of BOYSEN^® Automotive Lacquer.

Metal Surfaces
Wipe the surface with a rag soaked in paint thinner to remove grease, oil, wax and other foreign matter. For new galvanized surfaces, etch the surface by applying 10% BOYSEN^® Metal Etching Solution B-71 (Dilute 1 part of B-71 to 9 parts water). Rinse with water and dry immediately.

Unpainted galvanized surfaces that have been exposed for 6 months or more need not be etched.

Treat rusted steel by sanding and wire brushing. Use BOYSEN^® Metal Etching Solution B-71 on remaining rust. Let it stay for 10-15 minutes. Be sure to remove all remaining residue. Immediately prime after drying.

PAINTING SCHEDULE:
Wooden Surfaces
1st coat: BOYSEN^® Lacquer Primer Surfacer B-305
Putty: BOYSEN^® Lacquer Spot Putty B-306
2nd coat: BOYSEN^® Lacquer Primer Surfacer B-305 on puttied areas
Final Coat: BOYSEN^® Automotive Lacquer B-1300 in required number of coats

Metal Surfaces
1st coat: BOYSEN^® Epoxy Primer
2nd & 3rd Coat: BOYSEN^® Automotive Lacquer B-1300 in required number of coats

Boysen Automotive Lacquer: Engineered for durability and a flawless finish. Perfect for your vehicle’s touch-ups and refinements.