Description

DESCRIPTION: BOYSEN^® Permacoat™ Latex is a 100% acrylic paint with excellent hiding and outstanding durability.

PRINCIPAL USES: It is ideal for interior and exterior surfaces such as concrete, bricks, plaster, and drywalls.

FINISH: Flat, Semi-Gloss and Gloss

DRY TIME:
Flat:
Touch: 30 minutes
Recoat: 1 hour

Semi-Gloss and Gloss:
Touch: 1 hour
Recoat: 2 hours

THEORETICAL COVERAGE PER 4-LITERS:
Flat:
25 – 30 sq.m. as primer
30 – 35 sq.m. as topcoat

Semi-Gloss and Gloss:
30 – 35 sq.m.
*Depending on surface texture and porosity

TINTING: Will accept BOYSEN^® Latex Colors at a maximum level of ¼ Liter per 4-Liter can. Take note that B-1466 Hansa Yellow and B-1407 Toluidine Red are for interior painting only.

THINNING SOLVENT: Use as supplied. If necessary, thin with not more than ½ Liter of clean water per 4-Liter can.

CLEAN-UP SOLVENT: Water

PACKAGING: 1-Liter, 4-Liters, and 16-Liters

APPLICATION: By brush, roller, or airless spray

SURFACE PREPARATION:
New Concrete
Allow new concrete to dry for 14 – 28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar. If neutralizing, treat surface with a solution of 1 part BOYSEN^® Masonry Neutralizer B-44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting. However, if the concrete has been cured for more than 28 days, there is no need for neutralizer.

Drywall Substrates
Install and secure joints as per manufacturer’s recommendations.

Repainting
Scrape off all loose, scaling, flaking, and peeling paint manually or by using BOYSEN^® Paint and Varnish Remover B-141, as necessary. Wash surfaces clean and completely remove chemical residue. Let it dry.

For repainting concrete with chalky old paint, use BOYSEN^® Chalk Blocker™ B-7304 as surface conditioner. In case of mildew infestation, treat with a bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, let stand for 24 hours before cleaning off residue. Let dry.

PAINTING SCHEDULE:
Concrete Wall
Primer: BOYSEN^® Permacoat™ Flat Latex B-701
Putty: BOYSEN^® Masonry Putty B-7311 (interior use) or BOYSEN^® Acrytex™ Cast B-1711 (exterior use)
2nd & 3rd coat: BOYSEN^® Permacoat™ Latex (any sheen and/or color)

Boysen Permacoat Latex Paint: Transform your space with vibrant colors and lasting beauty. Premium quality for a durable and stylish finish. Elevate your home with Boysen excellence.